
Mesa Pool Equipment
New pumps, heaters, lights and controls, added while the pool is already being remodeled.
Many Mesa equipment pads still run an original single-speed pump, a sun-faded filter and brittle plumbing. A remodel is the natural time to replace them, because the pool is already down and the startup is already planned.
We keep equipment at the upgrade level: replacing the pump, filter, heater or lights with current models and tidying the plumbing at the pad. Electrical work is done by licensed electricians.
Startup with a new finish is easier on modern equipment, since a variable-speed pump can run long, gentle cycles while the new surface cures.


Pumps that run slower and longer to filter the pool with less energy.

Gas heaters or heat pumps to stretch the swim season into cooler months.

Pump, lights and heater controlled from a phone or wall panel.

Color LED lights in place of old incandescent fixtures.
| Equipment | Replace when | Why now |
|---|---|---|
| Pump | Loud, leaking or single-speed | Runs the new finish's startup cycles |
| Filter | Cracked tank or worn cartridges | Clean water protects a new surface |
| Pool light | Incandescent or failing | The niche is easiest to reach with the pool drained |
| Plumbing at the pad | Sun-brittle or patched | Everything is being reconnected anyway |
For most pools, yes. Arizona pools run their pumps many hours a day, and a variable-speed pump can do the same filtering at lower speeds.
Often. With the pool drained, the light niche is easy to reach, and switching to LED is a common part of our remodels.
Usually. It depends on space at the pad, gas or electrical service and the plumbing. We check all three during the walk-through.
Licensed electricians handle any electrical changes, and the City of Mesa asks for electrical plans with pool permits when the work calls for one.
Tell us how old your pump, filter and heater are. We'll check the pad and recommend upgrades.
Free estimate, no obligation